- Remodel can, for recessed lighting with limited ceiling access.
- Compatible with a variety of 4" trims including shower lights.
- Simple installation when adding to existing ceilings.
- Quick connect wiring connectors included in junction box.
Product Description
-------------------
Air-tite fixture sealed and keted to prevent airflow between
attic space and living areas. Can be installed from below the
ceiling. For providing accent and task lighting where insulation
can be kept 3" from housing. Thermal protector deactivates
fixture if overheating occurs due to improper lamping or
misapplied insulation. Junction box is listed for through branch
circuit wiring and has seven 1/2" knockouts and four pryouts with
integral strain for non-metallic sheathed cable. Four
remodel clips secure housing and accommodate ceiling thickness of
1/2" and 5/8". UL/cUL Listed 1598 Luminaire. UL/cUL Damp Location
Listed. UL/cUL Listed for Wet Location, covered ceiling - with
select trims. Certified Under ASTM-E283 for air tight
construction.
.com
Halo's recessed lighting fixtures are designed for ease of
installation and flexibility across a variety of materials and
situations. The hanger bars include pre-installed nails
(self-tapping screws are also available) in special housings that
ensure smooth, straight penetration, whether you're working with
laminated composites, engineered I-joists, open-web joist plates,
or even frozen lumber. The automatic leveling flanges allow you
to hold the housing securely in place with one hand while driving
nails with the other. The hangers of the H99T fit onto the T-bar
spline of a suspended ceiling system, and may be permanently
secured with optional TB7 T-bar clips.
Halo also makes it easy to work in confined spaces. To install in
joist spans of less than 12 inches, simply collapse the hanger
bars then bend and break them along the score lines--no tools
needed. The bars can also be removed and repositioned on the
site side of the frame if you need to the unit at 90
degrees to the original configuration. Wiring is a breeze with
Halo's patented Slide-N-Side wiring system, which allows wiring
outside the junction box.
The H99T, with its small, four-inch aperture, is the perfect
solution for discreet accent or task lighting, and is available
with a variety of trim styles (sold separately). Note that, while
this is not an IC-rated fixture, insulation may be placed around
it as long as a three-inch space is maintained around the
housing. UL damp location and feed-through rated; CSA certified;
IP rated. (Looking for a similar lamp for a remodel project? See
Halo's H99RT.)--Josh Dettweiler
.com
----
Halo's recessed lighting fixtures are designed for ease of
installation and flexibility across a variety of materials and
situations. The hanger bars include pre-installed nails
(self-tapping screws are also available) in special housings that
ensure smooth, straight penetration, whether you're working with
laminated composites, engineered I-joists, open-web joist plates,
or even frozen lumber. The automatic leveling flanges allow you
to hold the housing securely in place with one hand while driving
nails with the other. The hangers of the H99T fit onto the T-bar
spline of a suspended ceiling system, and may be permanently
secured with optional TB7 T-bar clips.
Halo also makes it easy to work in confined spaces. To install in
joist spans of less than 12 inches, simply collapse the hanger
bars then bend and break them along the score lines--no tools
needed. The bars can also be removed and repositioned on the
site side of the frame if you need to the unit at 90
degrees to the original configuration. Wiring is a breeze with
Halo's patented Slide-N-Side wiring system, which allows wiring
outside the junction box.
The H99T, with its small, four-inch aperture, is the perfect
solution for discreet accent or task lighting, and is available
with a variety of trim styles (sold separately). Note that, while
this is not an IC-rated fixture, insulation may be placed around
it as long as a three-inch space is maintained around the
housing. UL damp location and feed-through rated; CSA certified;
IP rated. (Looking for a similar lamp for a remodel project? See
Halo's H99RT.)--Josh Dettweiler
What's in the Box
Four-inch-aperture housing
P.when('A').execute(function(A) {
A.on('a:expander:toggle_description:toggle:collapse',
function(data) {
window.scroll(0, data.expander.$expander[0].offsetTop-100);
});
});
From the Manufacturer
---------------------
4" Remodel Non IC Airtite Shallow Ceiling Housing
See more ( javascript:void(0) )